Halcyon Evolve Wing System with Adjustable Cinch Harness
The adjustments to the Halcyon Evolve Wing System with Adjustable Cinch Harness occur by simply sliding the harness through a unique assembly. Now you can easily adjust the fit of your plate in or out of the water.
Wing Size
Steel or Ali Backplate
Dispatched in 1 to 2 days
The Halcyon Evolve Wing System with Adjustable Cinch Harness maintains a novel industry-first design. This unique circular wing provides unprecedented control, allowing divers to easily fine-tune their buoyancy, regardless of diving position.
This full twinset wing system comes with an easily adjustable Cinch harness and backplate of your choice fully factory set up. You just need to do little fine tuning on the harness.
Now you can change suits or divers and adjust the harness in a flash without compromising the harness integrity or Halcyon’s trademark, continuous webbing.
Halcyon Evolve Wing
The Evolve's circular design allows precise control of in-water buoyancy and trim. Horizontal trim is easily accomplished through the addition of a lift at the base of the wing. Gas trapping on one side or the other of the wing is virtually eliminated.
The Evolve wing for twinset diving integrates seamlessly with Halcyon's existing line of MC systems and is available in two lift capacities: 40lbs and 60lbs. For most divers the Evolve 40lbs provides more than enough lift.
The Halcyon Evolve Wing matches the Halcyon Infinity single cylinder wing for ease of use of the rear over-pressure valve for venting gas during the dive. Wreck divers and cavers will immediately appreciate Evolve's ease of buoyancy adjustment.
It doesn't matter if you are swimming or scootering; the Evolve's profile cuts through the water with less drag and greater efficiency.
The Halcyon Evolve has been extensively tested in every possible condition, from the tropics to the Arctic, with aluminium and steel cylinders.
The Evolve builds upon Halcyon's dedication to designing gear for the advanced diver. The Evolve's development team focused on stability, buoyancy and trim control improvements.
- Lifetime warranty on inner bladder RF welded seams
- Available in 40lbs (18kg) and 60lbs (27kg) lift capacities
- Circular design
- Outer shell 1680-denier ballistic nylon
- Inner bladder 400-denier Nylon
Halcyon Evolve Wing System with Adjustable Cinch Harness includes
- Halcyon Evolve Wing (40lbs or 60lbs)
- 22" Inflator inflator hose
- Fully assembled Aluminum or Stainless Steel Backplate with Cinch Harness
- Halcyon MC Storage Pack and bolts for backplate
Halcyon Cinch Harness
The Halcyon Cinch Adjustable Harness redefines what it means to dive a backplate, building upon a platform of simplicity while providing unprecedented security and ease of adjustment.
Halcyon developed the Cinch to save divers time and effort while sizing, fine-tuning and resizing diving harnesses.
Now you can change suits or divers and adjust the harness in a flash without compromising the harness integrity or Halcyon’s trademark, continuous webbing.
Adjustments to the Halcyon Cinch Adjustable Harness occur by simply sliding the harness through a unique assembly. You can even easily adjust the fit of their plate in or out of the water with a simple push or pull.
If you need a quick way to get out of your dive system or if you regularly change the thickness of your diving suit, Cinch Adjustable Harness will change the way you dive.
The Halcyon Cinch is specifically designed for Halcyon backplates and therefore does not fit all backplates.
The below Cinch components will be fully fitted to your backplate:
- Cinch adapter plate
- Halcyon Harness Webbing
- Separate left-hip D-ring assembly
- Extension bolt
- Bolts kit four stainless steel bolts with weldmate nuts
- Right-hip light retainer assembly
- Weight pocket attachment (pair) which allows the secure harness webbing to slide freely without affecting the placement of the light, ACB or D-ring.
- Quick-adjust crotch strap
Halcyon MC Storage Pak
The Halcyon backplate pocket is the most efficient means to store any of the various Halcyon inflatable markers with ease.
Stowing your favorite lift device in a Halcyon Storage Pak provides a hassle-free storage place without compromising the ability for rapid deployment of a SMB or lift bag.
Halcyon Backplate
As with most Halcyon products, an immense amount of behind-the-scenes work is required to create a plate we proudly sell.
Halcyon backplates have been refined to provide the highest-quality finish and materials available. Small details, like the unique bends near the bottom of the plate, create an ergonomic curve, increasing diver comfort. Meanwhile, the precise fabrication process ensures the quality you have come to expect from Halcyon.
Specially designed for mating with all Halcyon and conventional wings, the Halcyon Backplate is available in 3mm Stainless Steel and Aluminum. The utility holes allow easy mating with the MC Storage Pak to stow an SMB or to fit a drysuit inflation system.
Steel Backplate
- Constructed from high-grade, polished 304 stainless steel
- Bare backplate weight: 2.22kg
- Size: 26cm x 39.3cm
Aluminium Backplate
- Constructed from high-grade hard-coat aluminium
- Bare backplate weight: 0.77kg
- Size: 26cm x 39.3cm
What backplate to use?
While not set in stone, aluminium backplates are generally preferred by travelling or wet suit divers as they are lighter than their stainless steel counterparts.
The popular backplate for drysuit diving is stainless steel, where the additional weight is a benefit (spreading out the weight needed to compensate for buoyancy while taking it off the diver's waist).
Both backplates are based on the same Halcyon design and are compatible with the Halcyon Cinch Adjustable Harness. Most UK divers who use drysuits prefer the steel backplate.
SHIPPING:
We aim to dispatch all in-stock items within 2 working days but will inform you of approximate delivery times should any item on your order be out of stock or on supplier backorder due to current manufacturing or transport delays caused by global shortages and/or impeded production.
Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information on delivery terms and returns.
Our current shipping rates are as follows:
• UK mainland orders £45 and over: FREE
• UK mainland orders under £45: £4.90 Fixed Rate
• Channel Islands, Isle of Man & Highlands: £9.90 Fixed Rate
• Northern Ireland: £14.9 Fixed Rate
• European Union: £13.90 + 5% of order value (maximum £30)
• Rest of the World: £19.50 + 8% of order value (maximum £55)
• BFPO Post Codes: £20
INTERNATIONAL EXCEPTIONS:
For international orders containing weights, cylinders (excluding suit inflation bottles) and Suex scooters please contact us in advance before placing your order.
These products are not included in our global max-capped shipping rates and are only shipped outside of UK mainland after freight cost is calculated based on total weight, dimensions of parcel, location of delivery and the courier service used. We will let you know what this cost will be before processing any order.
All cylinders we ship within and outside of UK mainland are filled and tested on site before being emptied for dispatch. Cylinders shipped outside of the UK will be empty and will also have their valves removed, requiring reassembly after you receive delivery. Twinset manifolds and bands will also be removed and dispatched together with the cylinders for safe global shipping.
RETURNS & REFUNDS
We offer a 30 day return for any product sold under our Returns & Refunds Policy Please contact us before any return with your order number and date details. Receive our Returns Authorisation Form and instructions and enclose them with your return to expedite a refund. Detailed information is available in our Returns & Refunds Policy.
Email us at sales@dirdirect.com or call us on +44(0)1305 824 555
Note that all returned items are shipped at the customer's own risk and remain the customer's property until received by Underwater Explorers, so please ensure they are packaged well and use reliable postal services with tracking facilities. The goods will be inspected on arrival.
Return postages are at your own cost and our outbound shipping costs (if items are sold with integrated basic shipping charges i.e. Free shipping for orders £45 and above) the UK shipping rate may be deducted from any UK mainland refund unless linked to a fault/defect claim.
Please contact us with your order number and name before sending any returns to:
Underwater Explorers – Returns
Unit 1, Maritime Business Centre
Mereside, Portland
Dorset, DT5 1FD
United Kingdom
Please refer to our Shipping Policy and Returns & Refunds Policy for detailed information.
